• 70 and 150 cfm systems available
• Up to 175 psi
• Fits most popular work trucks
• Smallest and highest output in its class
• Air-on-demand technology
• 100% duty cycle ...
  
  

The PREDATAIR is ready to produce air with your supply of hydraulic power.  Simply connect your pressure and return lines to the hydraulic manifold on the PREDATAIR and you’re ready to go.  Of course you’ll need between 9 and 14 GPM to for the PREDATAIR40 and between 13 and 20 GPM for the PREDATAIR60, depending on your air CFM requirements.
 
Once you have the hydraulic fluid running through the system, turn the compressor on with a 12-volt power source and the integral digital control takes care of the rest.  A 12-volt solenoid will open and allow the hydraulic oil to travel into the hydraulic motor, thus starting the compressor.  The motor is directly coupled to the compressor via a SAE B ...

ELIMINATOR70 Air AfterCooler.  

This lightweight and compact system eliminates up to 80% of moisture from your air-lines and is rated for air systems up to 70 cfm.  Equipped with a powerful 12 volt fan, a moisture filter assembly and housed in a compact package, the ELIMINATOR70 Air AfterCooler is the perfect compliment for your air compressor. 

The De-Icer is a 12-Volt insulated rope heater designed to work with the UNDERHOOD VR70 and VR140 Air Compressor Systems. The De-Icer prevents freezing of the system pressure line and regulator in cold climates. The De-Icer is ready to work at the flick of a switch.

Environment Application:

A700136 - Moderate dust environment, typically industrial and off-road application (material handling and construction equipment) A700138 - Moderate to heavy dust environment, typically industrial and off-road applications (construction, mining and agriculture equipment)  Air cleaner for moderate & moderate to heavy dust environment.

High efficiency with less restricting air cleaner for moderate to heavy dust.

• Light weight & compact design
• Easy ...
  
  

The Filter Regulator Lubricator (F.R.L.) is designed to remove compressor lubricants, dirt and water from the air stream. The built in regulator can reduce the air pressure to extend the life of your tools. The lubricator adds atomized tool oil to the air stream to lubricate your pneumatic tools. If you need regulated, clean air for your tools, the F.R.L. is an effective component of your air system.

VMAC Throttle Commander Throttle Control - How it Works

Electronic Throttle Controls
This easy to install electronic throttle control maintains preset rpm over a range of engine torque loads. The throttle control is closed loop so it is watching an rpm signal from the vehicle. By watching this signal this will insure that the engine doesn't over rev. The Throttle Commander rpm can be adjusted easily by turning the adjustment screw or if applicable by utilizing the option Programming Tool. The RPM setting can range from 900 - 2300.

Electro-mechanical Throttle Controls
This electro-mechanical throttle control maintains a preset rpm over a range of engine torque loads. Three ...